If A grinding rumble every time the door moves.
Then Roller replacement.
Worn steel rollers develop flat spots; sealed nylon rollers run much more quietly on the same track. Garage Door Roller Replacement
Inspection, adjustment, sealing, and section-level repairs.
Repairs
Repair means restoring what is there. Maintenance means keeping it that way. We do both on the same visit where it makes sense, because a door that has just been fixed is the ideal moment to check everything around the fix.
Garage Door Safety InspectionA tenant mentioned the door is louder than it used to be.
Garage Door Tune-UpEvery morning the door announces itself to the whole street: a long metallic squeal as it climbs, a rattle at the top, and a…
Off-Track Garage Door ResetThe door came down fine but with a scraping noise, and now the vertical track on one side is bowed away from the wall.
Garage Door Panel ReplacementThe top section has developed a bend where the opener arm pulls on it.
Garage Door Bottom Seal ReplacementOne end of the bottom seal has slipped out of its channel and hangs down like a loose shoelace.
Garage Door Perimeter WeatherstripThe vinyl strip around the door used to be soft and white.
Garage Door Manual Lock RepairOn the old wooden door out back, one lock bar hangs loose from a rusted guide and the other is bent at an angle, so the handle…
Which fix fits?
Tap a situation. The answer opens here.
If A sharp squeal from the sides of the door.
Then Hinge lubrication or replacement.
Dry or cracked hinges bind as the panels articulate; lubricating or swapping them restores smooth movement. Garage Door Hinge Replacement
If The panels rattle and shake in the wind or as the door moves.
Then Hardware tightening.
Loose hinge bolts and roller brackets let the sections move against each other; a full tightening usually settles it.